External drive shows in Disk Utility but not in Finder

External SSD connected to a Mac, with one detected drive and an unavailable volume.

If Disk Utility shows your external SSD but Finder doesn’t, check whether the volume is mounted. A disk can be detected while its volume is unavailable. If it is already mounted, Finder may simply be hiding it from the sidebar. Check both before using Erase or First Aid.

If the device is missing, check cable and power. If the volume is unmounted, select it and try Mount. If it is mounted, check Finder settings.
Read the device and volume status first. Each result points to a different next step.

1. Find the physical drive and its volume

Open Disk Utility → View → Show All Devices. Under External, look for the drive by its name and capacity. An indented volume is what you open in Finder. On an APFS drive, a container may sit between the physical device and its volumes. Use the device view described by Apple to tell them apart.

2. If the volume is mounted, check Finder

Open Finder → Settings → Sidebar and enable External disks under Locations. Expand Locations if it is collapsed. The General tab separately controls whether external drives appear on the desktop. See Apple’s Finder visibility settings.

If the drive now opens but Finder refuses to save files, switch to the external disk read-only checklist.

3. If the volume is greyed out, try Mount

On a stable drive, select the volume and click Mount. If it is encrypted, unlock it with the password when prompted. A successful mount makes it available to Finder. See Apple’s Mount instructions.

If Mount fails, note the exact error and check whether this drive still opens on its original computer. Copy important data there if you can. For a stable drive with a separate copy, use the step-by-step First Aid guide. Cancel any prompt to initialise or erase a drive containing files you need. If the disk repeatedly drops out or makes unusual mechanical noises and has your only copy, stop repeated repair attempts.

4. If the physical device isn’t listed

Connect the drive directly using a known data cable and try another port. Check the power adapter on a powered enclosure. Look under USB or Thunderbolt in System Information. If another compatible computer can read it, make a copy there. For a drive that disappears around sleep, see the SSD disconnection checklist.

Seagate’s USB troubleshooting guide also distinguishes between detection in System Information and a mounted volume.